Plastic Intalox Saddle with High Void Volume

plastic intalox saddle random packing tower packing

Plastic Intalox Saddle - an Economical Random Packing

Plastic intalox saddle, composed by annulus and saddle, is made of heat-resistant and anti-corrosion plastic, mainly including PE, PP, RPP, PVC, CPVC and PVDF. It has characteristics such as low pressure drop, small specific gravity, high mass transfer efficiency, high void volume, high stability and so on. Compared with metal intalox saddle, plastic intalox saddle has better elasticity and lower cost. Being a kind of high-performance tower packing, it is widely applied in the absorption operation of desulfurization, decarbonization, nitric acid, nitrate and so forth.

This is a plastic intalox saddle on the green background.
PIS-01: Plastic intalox saddle, composed by annulus and saddle.One plastic intalox saddle shows the front, the other shows tits back.
PIS-02: Plastic intalox saddle has high void volume and high stability.
Specification - plastic intalox saddle
Model Type Diameter × Height × Thickness
D × H × ? (mm) Bulk number (m-3) Bulk density (kg/m3) Specific surface area (m2/m3) Void volume (m3/m3) Dry packing factor (m-1)
PISS-01 DN 25 25 × 12.5 × 1.2 97680 102 288 0. 85 467
PISS-02 DN 38 38 × 19 × 1.2 25200 91 265 0.95 309
PISS-03 DN 50 50 × 25 × 1.5 9400 75 250 0. 96 282
PISS-04 DN 76 76 × 38 × 3.0 3700 59 200 0. 97 220
Materials: polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chloridized polyvinyl chloride (CPVC) and polyvinylidene fluoride (PVDF).
Suitable temperature range: less than or equal to 100°C.
Feature

High mass transfer efficiency.
High void volume.
High stability.
Low pressure drop.
Small specific gravity.
Wide application scope.
Economical.
Application
Due to all of these advantages, plastic intalox saddle is widely used in the packing towers in petroleum, chemical, coal gas and environmental protection industries, etc.

Package
Packaged in dry boxes and cases.